Intel NUC5i3MYBE NUC Board BIOS

Szoftver screenshot:
Intel NUC5i3MYBE NUC Board BIOS
Szoftver adatai:
Változat: 0034 Frissítve
Feltöltés dátuma: 31 Dec 15
Fejlesztő: Intel
Engedély: Ingyenes
Népszerűség: 398

Rating: 3.4/5 (Total Votes: 5)

Fixes:

- Added xHCI Mode setting to USB Configuration page in BIOS.
- Updated processor support.
- Updated GOP to version 1032 and vBIOS to version 1038.
- Fixed issue with Power Sense and GPIO Lock Down default values when updating BIOS.
- Updated Intel ME firmware to version 10.0.38.1000.
- Removed item PCI latency Timer from BIOS Setup.
- Changed BIOS setting name Graphics Max Multiplier to Graphics Turbo Ratio.
- Fixed issue where USB S4/S5 power can't be Hidden and Disabled after Deep S4/S5 is set to Enabled.
- Fixed issue where the iSCSI driver does not accept “CHAP Name” to <iscsi> and “CHAP Secret” to 12 “1” or 12 “a”.
- Modified NFC behavior: When NFC is enabled in BIOS, GPIO Lockdown is disabled and greyed out.
- Fixed issue with Wake on USB from S5.
- Fixed issue with Keyboard Ready Beep and Startup Sound.
- Fixed issue where NFC device shows an error in Device Manager.
- Fixed issue with [Can't use VCUST/ITK operation Near Field Communication item]
- Added additional pin functions for GPIO Lockdown.
- Fixed issue where system locks up if IGD Aperture Size is set to 2048 MB or 4096 MB.

Updated Intel Visual BIOS to version 2.2.16:

- Fixed issue in Download Drivers feature where certain drivers were not visible if multiple attachments exist in the same record.
- Fixed issue in Download Drivers feature where incorrect drivers would display if product was not found in database.
- Fixed issue in Performance page that prevented additional workspaces from showing up (i.e. Memory Timings, etc.)

About This Release:

- ME Firmware: 10.0.38.1000
- PXE ROM version: 1.5.55
- Visual BIOS: 2.2.16
- RST RAID: 13.5.0.2164
- Integrated Graphics Option ROM: Build 1038
- Integrated Graphics UEFI Driver: 5.5.1032

Which file to choose:

- Recovery BIOS Update [MYi30028.BIO] - A .BIO file to be used for F7 BIOS Update method or a BIOS recovery process. In the unlikely event that a BIOS update is interrupted, it is possible the BIOS may be left in an unusable state. Use the recovery BIOS update to recover from this condition. It requires a USB flash device or CD.
- iflash BIOS Update [MYBDWi30.86A.0028..BI.ZIP] - A DOS-based utility to update the BIOS regardless of operating system. It requires a USB flash device or CD.
- Express BIOS Updates [MYBDWi30.86A.0028.EB.EXE] - Self-extracting Windows-based update file, designed to be used on Windows systems. This method is the most commonly used.
- Express BIOS Updates [MYBDWi30.86A.0028.EB.WINPE64.EXE] - for WinPE - Self-extracting Windows-based update file, designed to be used with either Microsoft Windows PE x64 or Microsoft Windows x64 operating systems.

Important Notes:

- Update the BIOS on your computer only if the newer BIOS version specifically solves a problem you have. We do not recommend BIOS updates for computers that do not need it.
- Downgrading the BIOS to an earlier version is not recommended and may not be supported. An earlier BIOS version may not contain the support for the latest processors, bug fixes, critical security updates, or support the latest board revisions currently being manufactured.
- If a BIOS update process is interrupted, your computer may not function properly.
- Before updating the BIOS on the Intel Desktop Board, manually record all BIOS settings that have been changed (from default) so they can be restored after completing the BIOS update.


Támogatott operációs rendszerek

Hasonló program

Más szoftver fejlesztő Intel

Hozzászólások a Intel NUC5i3MYBE NUC Board BIOS

Hozzászólás nem található
Megjegyzés hozzáadása
Kapcsolja be a képeket!